Rewrite Windows scripts: drop WSL, run natively
- install-windows.ps1: install Node.js via winget/choco (fallback to nodejs.cn manual download), then npm install openclaw. No WSL. - configure-aws-bedrock.ps1: full native PowerShell port with SecureString input, user-level env vars, config backup. - README: update Windows instructions to reflect native install. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
This commit is contained in:
Rick Mu
13
README.md
13
README.md
@@ -68,12 +68,11 @@ OpenClaw 不只是聊天，而是真正能**帮你做事**的 AI 助手：
|
||||
|
||||
| 步骤 | macOS | Windows |
|
||||
|------|-------|---------|
|
||||
| 1 | 检查/安装 Node.js 22+（通过 Homebrew） | 检查/安装 WSL2 + Ubuntu 24.04 |
|
||||
| 2 | 安装 OpenClaw（静默安装） | 启用 systemd + 安装 Node.js 22+ |
|
||||
| 3 | 启动配置向导 | 安装 OpenClaw + 网关守护进程 |
|
||||
| 4 | — | 启动配置向导 |
|
||||
| 1 | 检查/安装 Node.js 22+（通过 Homebrew） | 检查/安装 Node.js 22+（通过 winget / Chocolatey） |
|
||||
| 2 | 安装 OpenClaw | 安装 OpenClaw |
|
||||
| 3 | 启动配置向导 | 启动配置向导 |
|
||||
|
||||
脚本不会在 Homebrew (macOS) 或 WSL (Windows) 之外安装任何东西。
|
||||
脚本不会在 Homebrew (macOS) 或 npm (Windows) 之外安装任何东西。
|
||||
|
||||
### macOS
|
||||
|
||||
@@ -85,13 +84,13 @@ curl -fsSL https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/in
|
||||
|
||||
### Windows
|
||||
|
||||
以**管理员身份**打开 PowerShell，运行：
|
||||
打开 PowerShell，运行：
|
||||
|
||||
```powershell
|
||||
iwr -useb https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/install-windows.ps1 | iex
|
||||
```
|
||||
|
||||
> **Windows 说明：** 脚本会自动安装 WSL2（Windows 子系统 Linux）。可能需要重启，重启后再次运行脚本即可。
|
||||
> **Windows 说明：** 脚本会自动安装 Node.js（通过 winget 或 Chocolatey）+ OpenClaw。如果无法自动安装 Node.js，请先从 [nodejs.cn](https://nodejs.cn/download/) 手动下载安装。
|
||||
|
||||
### 配置流程
|
||||
|
||||
|
||||
@@ -1,6 +1,5 @@
|
||||
# ─────────────────────────────────────────────
|
||||
# OpenClaw AWS Bedrock 配置脚本 (Windows)
|
||||
# 在 WSL 中运行 bash 配置脚本
|
||||
# ─────────────────────────────────────────────
|
||||
|
||||
$ErrorActionPreference = "Stop"
|
||||
@@ -17,59 +16,222 @@ Write-Host "========================================" -ForegroundColor White
|
||||
Write-Host ""
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 1: 检查 WSL
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在检查 WSL 环境..."
|
||||
|
||||
$wslOk = $false
|
||||
try {
|
||||
$distros = wsl --list --quiet 2>&1
|
||||
if ($LASTEXITCODE -eq 0 -and $distros -match "Ubuntu") {
|
||||
$wslOk = $true
|
||||
}
|
||||
} catch {}
|
||||
|
||||
if (-not $wslOk) {
|
||||
Write-Err "未找到 WSL2 + Ubuntu。请先运行安装脚本：`niwr -useb https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/install-windows.ps1 | iex"
|
||||
}
|
||||
|
||||
Write-Ok "已找到 WSL2 + Ubuntu。"
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 2: 检查 OpenClaw
|
||||
# 步骤 1: 检查 OpenClaw
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在检查 OpenClaw 安装..."
|
||||
|
||||
$openclawCheck = wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && command -v openclaw || echo NOT_FOUND' 2>&1
|
||||
|
||||
if ($openclawCheck -match "NOT_FOUND") {
|
||||
try {
|
||||
$null = Get-Command openclaw -ErrorAction Stop
|
||||
Write-Ok "已找到 OpenClaw。"
|
||||
} catch {
|
||||
Write-Err "未找到 OpenClaw。请先运行安装脚本：`niwr -useb https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/install-windows.ps1 | iex"
|
||||
}
|
||||
|
||||
Write-Ok "已找到 OpenClaw。"
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 3: 在 WSL 中运行配置脚本
|
||||
# 步骤 2: 获取 AWS 凭证
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在 WSL 中启动 AWS Bedrock 配置..."
|
||||
Write-Host ""
|
||||
$openclawDir = Join-Path $env:USERPROFILE ".openclaw"
|
||||
$envFile = Join-Path $openclawDir ".env"
|
||||
$configFile = Join-Path $openclawDir "openclaw.json"
|
||||
|
||||
wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && curl -fsSL https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/configure-aws-bedrock.sh | bash -s < /dev/tty'
|
||||
$skipInput = $false
|
||||
|
||||
if ($LASTEXITCODE -ne 0) {
|
||||
Write-Warn "配置脚本执行过程中遇到问题。"
|
||||
Write-Host " 你可以手动在 WSL 中运行：" -ForegroundColor Gray
|
||||
Write-Host " wsl" -ForegroundColor Cyan
|
||||
Write-Host " curl -fsSL https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/configure-aws-bedrock.sh | bash" -ForegroundColor Cyan
|
||||
} else {
|
||||
Write-Host ""
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
Write-Host " AWS Bedrock 配置完成！" -ForegroundColor Green
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
Write-Host ""
|
||||
Write-Host " 使用方法（在 WSL 中）：" -ForegroundColor White
|
||||
Write-Host " wsl" -ForegroundColor Cyan
|
||||
Write-Host " source ~/.openclaw/.env" -ForegroundColor Cyan
|
||||
Write-Host " openclaw tui" -ForegroundColor Cyan
|
||||
Write-Host ""
|
||||
if (Test-Path $envFile) {
|
||||
$envContent = Get-Content $envFile -Raw
|
||||
if ($envContent -match "AWS_ACCESS_KEY_ID") {
|
||||
Write-Warn "检测到已存在 AWS 凭证配置"
|
||||
$useExisting = Read-Host "是否使用现有凭证? [Y/n]"
|
||||
if ($useExisting -ne "n" -and $useExisting -ne "N") {
|
||||
$skipInput = $true
|
||||
# 加载现有凭证
|
||||
foreach ($line in (Get-Content $envFile)) {
|
||||
if ($line -match '^\s*export\s+(\w+)="?([^"]*)"?') {
|
||||
[Environment]::SetEnvironmentVariable($Matches[1], $Matches[2], "Process")
|
||||
}
|
||||
}
|
||||
Write-Ok "使用现有凭证"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (-not $skipInput) {
|
||||
Write-Info "请输入你的 AWS Access Key ID："
|
||||
Write-Host "(从 IAM 控制台获取)" -ForegroundColor Yellow
|
||||
$accessKey = Read-Host
|
||||
|
||||
if ([string]::IsNullOrWhiteSpace($accessKey)) {
|
||||
Write-Err "AWS Access Key ID 不能为空"
|
||||
}
|
||||
|
||||
Write-Info "请输入你的 AWS Secret Access Key："
|
||||
$secretKey = Read-Host -AsSecureString
|
||||
$secretKeyPlain = [Runtime.InteropServices.Marshal]::PtrToStringAuto(
|
||||
[Runtime.InteropServices.Marshal]::SecureStringToBSTR($secretKey)
|
||||
)
|
||||
|
||||
if ([string]::IsNullOrWhiteSpace($secretKeyPlain)) {
|
||||
Write-Err "AWS Secret Access Key 不能为空"
|
||||
}
|
||||
|
||||
Write-Info "请输入 AWS 区域 (默认: us-west-2)："
|
||||
$region = Read-Host
|
||||
if ([string]::IsNullOrWhiteSpace($region)) {
|
||||
$region = "us-west-2"
|
||||
}
|
||||
|
||||
$env:AWS_ACCESS_KEY_ID = $accessKey
|
||||
$env:AWS_SECRET_ACCESS_KEY = $secretKeyPlain
|
||||
$env:AWS_REGION = $region
|
||||
|
||||
Write-Ok "已获取 AWS 凭证"
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 3: 创建环境变量文件
|
||||
# ─────────────────────────────────────────────
|
||||
if (-not $skipInput) {
|
||||
Write-Info "正在创建 $envFile..."
|
||||
|
||||
if (-not (Test-Path $openclawDir)) {
|
||||
New-Item -ItemType Directory -Path $openclawDir -Force | Out-Null
|
||||
}
|
||||
|
||||
# 备份
|
||||
if (Test-Path $envFile) {
|
||||
$timestamp = Get-Date -Format "yyyyMMddHHmmss"
|
||||
Copy-Item $envFile "$envFile.backup.$timestamp"
|
||||
Write-Warn "已备份现有 .env 文件"
|
||||
}
|
||||
|
||||
$envContent = @"
|
||||
# AWS Bedrock Credentials
|
||||
export AWS_ACCESS_KEY_ID="$($env:AWS_ACCESS_KEY_ID)"
|
||||
export AWS_SECRET_ACCESS_KEY="$($env:AWS_SECRET_ACCESS_KEY)"
|
||||
export AWS_REGION="$($env:AWS_REGION)"
|
||||
"@
|
||||
|
||||
Set-Content -Path $envFile -Value $envContent -Encoding UTF8
|
||||
Write-Ok "已创建环境变量文件"
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 4: 配置 openclaw.json
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在配置 $configFile..."
|
||||
|
||||
# 备份
|
||||
if (Test-Path $configFile) {
|
||||
$timestamp = Get-Date -Format "yyyyMMddHHmmss"
|
||||
Copy-Item $configFile "$configFile.backup.$timestamp"
|
||||
Write-Warn "已备份现有 openclaw.json 文件"
|
||||
}
|
||||
|
||||
$awsRegion = if ($env:AWS_REGION) { $env:AWS_REGION } else { "us-west-2" }
|
||||
|
||||
$configContent = @"
|
||||
{
|
||||
"gateway": {
|
||||
"mode": "local"
|
||||
},
|
||||
"models": {
|
||||
"providers": {
|
||||
"amazon-bedrock": {
|
||||
"baseUrl": "https://bedrock-runtime.$awsRegion.amazonaws.com",
|
||||
"api": "bedrock-converse-stream",
|
||||
"auth": "aws-sdk",
|
||||
"models": [
|
||||
{
|
||||
"id": "global.anthropic.claude-opus-4-6-v1",
|
||||
"name": "Claude Opus 4.6 (Bedrock)",
|
||||
"reasoning": true,
|
||||
"input": ["text", "image"],
|
||||
"cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
|
||||
"contextWindow": 200000,
|
||||
"maxTokens": 8192
|
||||
},
|
||||
{
|
||||
"id": "global.anthropic.claude-opus-4-5-20251001-v1:0",
|
||||
"name": "Claude Opus 4.5 (Bedrock)",
|
||||
"reasoning": true,
|
||||
"input": ["text", "image"],
|
||||
"cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
|
||||
"contextWindow": 200000,
|
||||
"maxTokens": 8192
|
||||
},
|
||||
{
|
||||
"id": "global.anthropic.claude-sonnet-4-5-20250929-v1:0",
|
||||
"name": "Claude Sonnet 4.5 (Bedrock)",
|
||||
"reasoning": true,
|
||||
"input": ["text", "image"],
|
||||
"cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
|
||||
"contextWindow": 200000,
|
||||
"maxTokens": 8192
|
||||
},
|
||||
{
|
||||
"id": "global.anthropic.claude-haiku-4-5-20251001-v1:0",
|
||||
"name": "Claude Haiku 4.5 (Bedrock)",
|
||||
"reasoning": false,
|
||||
"input": ["text", "image"],
|
||||
"cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
|
||||
"contextWindow": 200000,
|
||||
"maxTokens": 8192
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
},
|
||||
"agents": {
|
||||
"defaults": {
|
||||
"model": {
|
||||
"primary": "amazon-bedrock/global.anthropic.claude-sonnet-4-5-20250929-v1:0"
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
"@
|
||||
|
||||
Set-Content -Path $configFile -Value $configContent -Encoding UTF8
|
||||
Write-Ok "已配置 openclaw.json"
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 5: 设置环境变量到当前会话
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在设置环境变量..."
|
||||
|
||||
# 设置为用户级环境变量（持久化）
|
||||
[Environment]::SetEnvironmentVariable("AWS_ACCESS_KEY_ID", $env:AWS_ACCESS_KEY_ID, "User")
|
||||
[Environment]::SetEnvironmentVariable("AWS_SECRET_ACCESS_KEY", $env:AWS_SECRET_ACCESS_KEY, "User")
|
||||
[Environment]::SetEnvironmentVariable("AWS_REGION", $env:AWS_REGION, "User")
|
||||
|
||||
Write-Ok "已设置用户环境变量（新 PowerShell 窗口自动生效）"
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 6: 完成
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Host ""
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
Write-Host " 配置完成！" -ForegroundColor Green
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
Write-Host ""
|
||||
Write-Host " 配置摘要：" -ForegroundColor White
|
||||
Write-Host " Provider: AWS Bedrock" -ForegroundColor Cyan
|
||||
Write-Host " Region: $awsRegion" -ForegroundColor Cyan
|
||||
Write-Host " 默认模型: Claude Sonnet 4.5" -ForegroundColor Cyan
|
||||
Write-Host " 已配置模型:" -ForegroundColor White
|
||||
Write-Host " * Claude Opus 4.6" -ForegroundColor Cyan
|
||||
Write-Host " * Claude Opus 4.5" -ForegroundColor Cyan
|
||||
Write-Host " * Claude Sonnet 4.5" -ForegroundColor Cyan
|
||||
Write-Host " * Claude Haiku 4.5" -ForegroundColor Cyan
|
||||
Write-Host ""
|
||||
Write-Host " 使用方法：" -ForegroundColor White
|
||||
Write-Host " cd 你的项目路径" -ForegroundColor Gray
|
||||
Write-Host " openclaw" -ForegroundColor Cyan
|
||||
Write-Host ""
|
||||
Write-Host " 测试连接：" -ForegroundColor White
|
||||
Write-Host " openclaw agent --session-id test --message `"Say OK`" --local" -ForegroundColor Cyan
|
||||
Write-Host ""
|
||||
Write-Host " 所需 IAM 权限：" -ForegroundColor White
|
||||
Write-Host " * bedrock:InvokeModel" -ForegroundColor Yellow
|
||||
Write-Host " * bedrock:InvokeModelWithResponseStream" -ForegroundColor Yellow
|
||||
Write-Host " 或使用托管策略：AmazonBedrockFullAccess" -ForegroundColor Yellow
|
||||
Write-Host ""
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
# ─────────────────────────────────────────────
|
||||
# OpenClaw 一键部署安装脚本 (Windows)
|
||||
# 安装 WSL2 + Ubuntu，然后在 WSL 中设置 OpenClaw
|
||||
# 安装 Node.js + OpenClaw，原生 Windows 运行
|
||||
# ─────────────────────────────────────────────
|
||||
|
||||
$ErrorActionPreference = "Stop"
|
||||
@@ -21,151 +21,111 @@ function Write-Header {
|
||||
Write-Header
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 1: 检查 / 安装 WSL2
|
||||
# 步骤 1: 检查 / 安装 Node.js 22+
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在检查 WSL2 安装..."
|
||||
Write-Info "正在检查 Node.js..."
|
||||
|
||||
$wslInstalled = $false
|
||||
try {
|
||||
$wslOutput = wsl --status 2>&1
|
||||
if ($LASTEXITCODE -eq 0) {
|
||||
$wslInstalled = $true
|
||||
}
|
||||
} catch {
|
||||
$wslInstalled = $false
|
||||
}
|
||||
|
||||
# 检查 WSL 中是否有 Ubuntu
|
||||
$ubuntuAvailable = $false
|
||||
if ($wslInstalled) {
|
||||
$distros = wsl --list --quiet 2>&1
|
||||
if ($distros -match "Ubuntu") {
|
||||
$ubuntuAvailable = $true
|
||||
}
|
||||
}
|
||||
|
||||
if (-not $wslInstalled -or -not $ubuntuAvailable) {
|
||||
Write-Info "正在安装 WSL2 和 Ubuntu 24.04..."
|
||||
Write-Warn "可能需要重启。重启后请再次运行此脚本。"
|
||||
|
||||
wsl --install -d Ubuntu-24.04
|
||||
if ($LASTEXITCODE -ne 0) {
|
||||
Write-Err "WSL2 安装失败。请手动安装：wsl --install -d Ubuntu-24.04"
|
||||
}
|
||||
|
||||
Write-Ok "WSL2 + Ubuntu 24.04 安装完成。"
|
||||
Write-Warn "如果提示重启，请重启计算机后再次运行此脚本。"
|
||||
|
||||
# 检查是否需要重启
|
||||
$restartNeeded = $false
|
||||
try {
|
||||
wsl --status 2>&1 | Out-Null
|
||||
if ($LASTEXITCODE -ne 0) { $restartNeeded = $true }
|
||||
} catch {
|
||||
$restartNeeded = $true
|
||||
}
|
||||
|
||||
if ($restartNeeded) {
|
||||
Write-Host ""
|
||||
Write-Warn "需要重启才能完成 WSL2 安装。"
|
||||
Write-Host "重启后，请再次运行此脚本。" -ForegroundColor Yellow
|
||||
Write-Host ""
|
||||
Read-Host "按 Enter 键退出"
|
||||
exit 0
|
||||
}
|
||||
} else {
|
||||
Write-Ok "已找到 WSL2 和 Ubuntu。"
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 2: 在 WSL 中启用 systemd
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在配置 WSL 中的 systemd..."
|
||||
|
||||
$checkSystemd = wsl -d Ubuntu-24.04 -- bash -c "cat /etc/wsl.conf 2>/dev/null || echo ''"
|
||||
if ($checkSystemd -notmatch "systemd=true") {
|
||||
wsl -d Ubuntu-24.04 -- bash -c "echo '[boot]' | sudo tee /etc/wsl.conf > /dev/null && echo 'systemd=true' | sudo tee -a /etc/wsl.conf > /dev/null"
|
||||
Write-Ok "已在 /etc/wsl.conf 中启用 systemd"
|
||||
|
||||
# ─────────────────────────────────────────
|
||||
# 步骤 3: 重启 WSL
|
||||
# ─────────────────────────────────────────
|
||||
Write-Info "正在重启 WSL 以应用 systemd..."
|
||||
wsl --shutdown
|
||||
Start-Sleep -Seconds 3
|
||||
Write-Ok "WSL 已重启。"
|
||||
} else {
|
||||
Write-Ok "systemd 已启用。"
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 4: 在 WSL 中安装 Node 22+
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在检查 WSL 中的 Node.js..."
|
||||
|
||||
$nodeCheck = wsl -d Ubuntu-24.04 -- bash -c "command -v node && node -v || echo 'NOT_FOUND'" 2>&1
|
||||
$needsNode = $true
|
||||
|
||||
if ($nodeCheck -notmatch "NOT_FOUND" -and $nodeCheck -match "v(\d+)") {
|
||||
$nodeVersion = [int]$Matches[1]
|
||||
if ($nodeVersion -ge 22) {
|
||||
Write-Ok "WSL 中已找到 Node.js v$nodeVersion (>= 22)。"
|
||||
try {
|
||||
$nodeVersion = (node -v 2>$null)
|
||||
if ($nodeVersion -match "v(\d+)") {
|
||||
$major = [int]$Matches[1]
|
||||
if ($major -ge 22) {
|
||||
Write-Ok "已找到 Node.js $nodeVersion"
|
||||
$needsNode = $false
|
||||
} else {
|
||||
Write-Warn "WSL 中已找到 Node.js v$nodeVersion，但需要 >= 22。正在升级..."
|
||||
Write-Warn "已找到 Node.js $nodeVersion，但需要 v22+，正在升级..."
|
||||
}
|
||||
} else {
|
||||
Write-Warn "WSL 中未找到 Node.js。"
|
||||
}
|
||||
} catch {
|
||||
Write-Warn "未找到 Node.js。"
|
||||
}
|
||||
|
||||
if ($needsNode) {
|
||||
Write-Info "正在通过 NodeSource 在 WSL 中安装 Node.js 22..."
|
||||
Write-Info "正在安装 Node.js 22..."
|
||||
|
||||
$installNodeScript = @'
|
||||
set -e
|
||||
curl -fsSL https://deb.nodesource.com/setup_22.x | sudo -E bash -
|
||||
sudo apt-get install -y nodejs
|
||||
node -v
|
||||
'@
|
||||
$installed = $false
|
||||
|
||||
wsl -d Ubuntu-24.04 -- bash -c $installNodeScript
|
||||
if ($LASTEXITCODE -ne 0) {
|
||||
Write-Err "WSL 中 Node.js 安装失败。"
|
||||
# 方式 1: winget（Windows 11 / Windows 10 自带）
|
||||
if (-not $installed -and (Get-Command winget -ErrorAction SilentlyContinue)) {
|
||||
Write-Info "使用 winget 安装..."
|
||||
winget install OpenJS.NodeJS.LTS --accept-package-agreements --accept-source-agreements
|
||||
if ($LASTEXITCODE -eq 0) {
|
||||
$installed = $true
|
||||
Write-Ok "Node.js 已通过 winget 安装"
|
||||
}
|
||||
Write-Ok "WSL 中 Node.js 22 安装完成。"
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 5: 在 WSL 中安装 OpenClaw
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在在 WSL 中安装 OpenClaw..."
|
||||
|
||||
$openclawCheck = wsl -d Ubuntu-24.04 -- bash -c "command -v openclaw || echo 'NOT_FOUND'" 2>&1
|
||||
|
||||
if ($openclawCheck -match "NOT_FOUND") {
|
||||
wsl -d Ubuntu-24.04 -- bash -c "curl -fsSL https://openclaw.ai/install.sh | bash -s -- --no-onboard"
|
||||
if ($LASTEXITCODE -ne 0) {
|
||||
Write-Err "WSL 中 OpenClaw 安装失败。"
|
||||
}
|
||||
Write-Ok "WSL 中 OpenClaw 安装完成。"
|
||||
} else {
|
||||
Write-Ok "WSL 中已安装 OpenClaw。"
|
||||
|
||||
# 方式 2: Chocolatey
|
||||
if (-not $installed -and (Get-Command choco -ErrorAction SilentlyContinue)) {
|
||||
Write-Info "使用 Chocolatey 安装..."
|
||||
choco install nodejs-lts -y
|
||||
if ($LASTEXITCODE -eq 0) {
|
||||
$installed = $true
|
||||
Write-Ok "Node.js 已通过 Chocolatey 安装"
|
||||
}
|
||||
}
|
||||
|
||||
# 方式 3: 手动下载提示
|
||||
if (-not $installed) {
|
||||
Write-Host ""
|
||||
Write-Err "无法自动安装 Node.js。请手动安装后重新运行此脚本：`n`n 下载地址：https://nodejs.cn/download/`n 或：https://nodejs.org/en/download/`n`n 安装完成后重新打开 PowerShell 运行此脚本。"
|
||||
}
|
||||
|
||||
# 刷新 PATH
|
||||
$env:Path = [System.Environment]::GetEnvironmentVariable("Path", "Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path", "User")
|
||||
|
||||
# 验证安装
|
||||
try {
|
||||
$nodeVersion = (node -v 2>$null)
|
||||
Write-Ok "Node.js $nodeVersion 安装成功"
|
||||
} catch {
|
||||
Write-Err "Node.js 安装后验证失败。请关闭 PowerShell 重新打开后再试。"
|
||||
}
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 6: 安装 OpenClaw 网关守护进程
|
||||
# 步骤 2: 安装 OpenClaw
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Info "正在安装 OpenClaw 网关守护进程..."
|
||||
Write-Info "正在检查 OpenClaw..."
|
||||
|
||||
wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && openclaw gateway install'
|
||||
if ($LASTEXITCODE -ne 0) {
|
||||
Write-Warn "网关守护进程安装遇到问题。您可以稍后使用以下命令安装：openclaw gateway install"
|
||||
} else {
|
||||
Write-Ok "网关守护进程安装完成。"
|
||||
$needsInstall = $true
|
||||
|
||||
try {
|
||||
$null = Get-Command openclaw -ErrorAction Stop
|
||||
Write-Ok "已找到 OpenClaw。"
|
||||
$needsInstall = $false
|
||||
} catch {
|
||||
Write-Info "正在安装 OpenClaw..."
|
||||
}
|
||||
|
||||
if ($needsInstall) {
|
||||
npm install -g openclaw@latest
|
||||
if ($LASTEXITCODE -ne 0) {
|
||||
Write-Err "OpenClaw 安装失败。请手动运行：npm install -g openclaw@latest"
|
||||
}
|
||||
|
||||
# 刷新 PATH
|
||||
$env:Path = [System.Environment]::GetEnvironmentVariable("Path", "Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path", "User")
|
||||
|
||||
# 把 npm global bin 加到 PATH
|
||||
try {
|
||||
$npmPrefix = (npm config get prefix 2>$null).Trim()
|
||||
if ($npmPrefix) {
|
||||
$userPath = [Environment]::GetEnvironmentVariable("Path", "User")
|
||||
if (-not ($userPath -split ";" | Where-Object { $_ -ieq $npmPrefix })) {
|
||||
[Environment]::SetEnvironmentVariable("Path", "$userPath;$npmPrefix", "User")
|
||||
$env:Path += ";$npmPrefix"
|
||||
}
|
||||
}
|
||||
} catch {}
|
||||
|
||||
Write-Ok "OpenClaw 安装完成。"
|
||||
}
|
||||
|
||||
# ─────────────────────────────────────────────
|
||||
# 步骤 7: 启动交互式配置
|
||||
# 步骤 3: 启动交互式配置
|
||||
# ─────────────────────────────────────────────
|
||||
Write-Host ""
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
@@ -177,7 +137,7 @@ Write-Host " 选择 MiniMax 可获得 7天免费试用 - 无需信用卡。" -F
|
||||
Write-Host " 注册地址：https://platform.minimax.io" -ForegroundColor Cyan
|
||||
Write-Host ""
|
||||
|
||||
wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && openclaw onboard --accept-risk --flow quickstart --node-manager npm --skip-skills < /dev/tty'
|
||||
openclaw onboard --accept-risk --flow quickstart --node-manager npm --skip-skills
|
||||
|
||||
Write-Host ""
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
@@ -185,7 +145,8 @@ Write-Host " 配置完成！" -ForegroundColor Green
|
||||
Write-Host "========================================" -ForegroundColor Green
|
||||
Write-Host ""
|
||||
Write-Host " 接下来：" -ForegroundColor White
|
||||
Write-Host " 1. 开始使用 OpenClaw：openclaw（在 WSL 中）" -ForegroundColor Gray
|
||||
Write-Host " 2. 添加技能（可选）：openclaw configure --section skills" -ForegroundColor Gray
|
||||
Write-Host " 3. 浏览可用技能：openclaw skills" -ForegroundColor Gray
|
||||
Write-Host " 1. 进入项目目录：cd 你的项目路径" -ForegroundColor Gray
|
||||
Write-Host " 2. 开始使用 OpenClaw：openclaw" -ForegroundColor Gray
|
||||
Write-Host " 3. 添加技能（可选）：openclaw configure --section skills" -ForegroundColor Gray
|
||||
Write-Host " 4. 浏览可用技能：openclaw skills" -ForegroundColor Gray
|
||||
Write-Host ""
|
||||
|
||||
Reference in New Issue
Block a user