Rewrite Windows scripts: drop WSL, run natively

- install-windows.ps1: install Node.js via winget/choco (fallback
  to nodejs.cn manual download), then npm install openclaw. No WSL.
- configure-aws-bedrock.ps1: full native PowerShell port with
  SecureString input, user-level env vars, config backup.
- README: update Windows instructions to reflect native install.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

README.md

@@ -68,12 +68,11 @@ OpenClaw 不只是聊天，而是真正能**帮你做事**的 AI 助手：
 
 | 步骤 | macOS | Windows |
 |------|-------|---------|
-| 1 | 检查/安装 Node.js 22+（通过 Homebrew） | 检查/安装 WSL2 + Ubuntu 24.04 |
+| 1 | 检查/安装 Node.js 22+（通过 Homebrew） | 检查/安装 Node.js 22+（通过 winget / Chocolatey） |
-| 2 | 安装 OpenClaw（静默安装） | 启用 systemd + 安装 Node.js 22+ |
+| 2 | 安装 OpenClaw | 安装 OpenClaw |
-| 3 | 启动配置向导 | 安装 OpenClaw + 网关守护进程 |
+| 3 | 启动配置向导 | 启动配置向导 |
-| 4 | — | 启动配置向导 |
 
-脚本不会在 Homebrew (macOS) 或 WSL (Windows) 之外安装任何东西。
+脚本不会在 Homebrew (macOS) 或 npm (Windows) 之外安装任何东西。
 
 ### macOS
 
@@ -85,13 +84,13 @@ curl -fsSL https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/in
 
 ### Windows
 
-以**管理员身份**打开 PowerShell，运行：
+打开 PowerShell，运行：
 
 ```powershell
 iwr -useb https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/install-windows.ps1 | iex
 ```
 
-> **Windows 说明：** 脚本会自动安装 WSL2（Windows 子系统 Linux）。可能需要重启，重启后再次运行脚本即可。
+> **Windows 说明：** 脚本会自动安装 Node.js（通过 winget 或 Chocolatey）+ OpenClaw。如果无法自动安装 Node.js，请先从 [nodejs.cn](https://nodejs.cn/download/) 手动下载安装。
 
 ### 配置流程
 

configure-aws-bedrock.ps1

@@ -1,6 +1,5 @@
 # ─────────────────────────────────────────────
 # OpenClaw AWS Bedrock 配置脚本 (Windows)
-# 在 WSL 中运行 bash 配置脚本
 # ─────────────────────────────────────────────
 
 $ErrorActionPreference = "Stop"
@@ -17,59 +16,222 @@ Write-Host "========================================" -ForegroundColor White
 Write-Host ""
 
 # ─────────────────────────────────────────────
-# 步骤 1: 检查 WSL
+# 步骤 1: 检查 OpenClaw
-# ─────────────────────────────────────────────
-Write-Info "正在检查 WSL 环境..."
-
-$wslOk = $false
-try {
-    $distros = wsl --list --quiet 2>&1
-    if ($LASTEXITCODE -eq 0 -and $distros -match "Ubuntu") {
-        $wslOk = $true
-    }
-} catch {}
-
-if (-not $wslOk) {
-    Write-Err "未找到 WSL2 + Ubuntu。请先运行安装脚本：`niwr -useb https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/install-windows.ps1 | iex"
-}
-
-Write-Ok "已找到 WSL2 + Ubuntu。"
-
-# ─────────────────────────────────────────────
-# 步骤 2: 检查 OpenClaw
 # ─────────────────────────────────────────────
 Write-Info "正在检查 OpenClaw 安装..."
 
-$openclawCheck = wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && command -v openclaw || echo NOT_FOUND' 2>&1
+try {
-
+    $null = Get-Command openclaw -ErrorAction Stop
-if ($openclawCheck -match "NOT_FOUND") {
+    Write-Ok "已找到 OpenClaw。"
+} catch {
     Write-Err "未找到 OpenClaw。请先运行安装脚本：`niwr -useb https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/install-windows.ps1 | iex"
 }
 
-Write-Ok "已找到 OpenClaw。"
-
 # ─────────────────────────────────────────────
-# 步骤 3: 在 WSL 中运行配置脚本
+# 步骤 2: 获取 AWS 凭证
 # ─────────────────────────────────────────────
-Write-Info "正在 WSL 中启动 AWS Bedrock 配置..."
+$openclawDir = Join-Path $env:USERPROFILE ".openclaw"
-Write-Host ""
+$envFile = Join-Path $openclawDir ".env"
+$configFile = Join-Path $openclawDir "openclaw.json"
 
-wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && curl -fsSL https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/configure-aws-bedrock.sh | bash -s < /dev/tty'
+$skipInput = $false
 
-if ($LASTEXITCODE -ne 0) {
+if (Test-Path $envFile) {
-    Write-Warn "配置脚本执行过程中遇到问题。"
+    $envContent = Get-Content $envFile -Raw
-    Write-Host "  你可以手动在 WSL 中运行：" -ForegroundColor Gray
+    if ($envContent -match "AWS_ACCESS_KEY_ID") {
-    Write-Host "    wsl" -ForegroundColor Cyan
+        Write-Warn "检测到已存在 AWS 凭证配置"
-    Write-Host "    curl -fsSL https://raw.githubusercontent.com/736773174/openclaw-setup-cn/main/configure-aws-bedrock.sh | bash" -ForegroundColor Cyan
+        $useExisting = Read-Host "是否使用现有凭证? [Y/n]"
-} else {
+        if ($useExisting -ne "n" -and $useExisting -ne "N") {
-    Write-Host ""
+            $skipInput = $true
-    Write-Host "========================================" -ForegroundColor Green
+            # 加载现有凭证
-    Write-Host "  AWS Bedrock 配置完成！" -ForegroundColor Green
+            foreach ($line in (Get-Content $envFile)) {
-    Write-Host "========================================" -ForegroundColor Green
+                if ($line -match '^\s*export\s+(\w+)="?([^"]*)"?') {
-    Write-Host ""
+                    [Environment]::SetEnvironmentVariable($Matches[1], $Matches[2], "Process")
-    Write-Host "  使用方法（在 WSL 中）：" -ForegroundColor White
+                }
-    Write-Host "    wsl" -ForegroundColor Cyan
+            }
-    Write-Host "    source ~/.openclaw/.env" -ForegroundColor Cyan
+            Write-Ok "使用现有凭证"
-    Write-Host "    openclaw tui" -ForegroundColor Cyan
+        }
-    Write-Host ""
+    }
 }
+
+if (-not $skipInput) {
+    Write-Info "请输入你的 AWS Access Key ID："
+    Write-Host "(从 IAM 控制台获取)" -ForegroundColor Yellow
+    $accessKey = Read-Host
+
+    if ([string]::IsNullOrWhiteSpace($accessKey)) {
+        Write-Err "AWS Access Key ID 不能为空"
+    }
+
+    Write-Info "请输入你的 AWS Secret Access Key："
+    $secretKey = Read-Host -AsSecureString
+    $secretKeyPlain = [Runtime.InteropServices.Marshal]::PtrToStringAuto(
+        [Runtime.InteropServices.Marshal]::SecureStringToBSTR($secretKey)
+    )
+
+    if ([string]::IsNullOrWhiteSpace($secretKeyPlain)) {
+        Write-Err "AWS Secret Access Key 不能为空"
+    }
+
+    Write-Info "请输入 AWS 区域 (默认: us-west-2)："
+    $region = Read-Host
+    if ([string]::IsNullOrWhiteSpace($region)) {
+        $region = "us-west-2"
+    }
+
+    $env:AWS_ACCESS_KEY_ID = $accessKey
+    $env:AWS_SECRET_ACCESS_KEY = $secretKeyPlain
+    $env:AWS_REGION = $region
+
+    Write-Ok "已获取 AWS 凭证"
+}
+
+# ─────────────────────────────────────────────
+# 步骤 3: 创建环境变量文件
+# ─────────────────────────────────────────────
+if (-not $skipInput) {
+    Write-Info "正在创建 $envFile..."
+
+    if (-not (Test-Path $openclawDir)) {
+        New-Item -ItemType Directory -Path $openclawDir -Force | Out-Null
+    }
+
+    # 备份
+    if (Test-Path $envFile) {
+        $timestamp = Get-Date -Format "yyyyMMddHHmmss"
+        Copy-Item $envFile "$envFile.backup.$timestamp"
+        Write-Warn "已备份现有 .env 文件"
+    }
+
+    $envContent = @"
+# AWS Bedrock Credentials
+export AWS_ACCESS_KEY_ID="$($env:AWS_ACCESS_KEY_ID)"
+export AWS_SECRET_ACCESS_KEY="$($env:AWS_SECRET_ACCESS_KEY)"
+export AWS_REGION="$($env:AWS_REGION)"
+"@
+
+    Set-Content -Path $envFile -Value $envContent -Encoding UTF8
+    Write-Ok "已创建环境变量文件"
+}
+
+# ─────────────────────────────────────────────
+# 步骤 4: 配置 openclaw.json
+# ─────────────────────────────────────────────
+Write-Info "正在配置 $configFile..."
+
+# 备份
+if (Test-Path $configFile) {
+    $timestamp = Get-Date -Format "yyyyMMddHHmmss"
+    Copy-Item $configFile "$configFile.backup.$timestamp"
+    Write-Warn "已备份现有 openclaw.json 文件"
+}
+
+$awsRegion = if ($env:AWS_REGION) { $env:AWS_REGION } else { "us-west-2" }
+
+$configContent = @"
+{
+  "gateway": {
+    "mode": "local"
+  },
+  "models": {
+    "providers": {
+      "amazon-bedrock": {
+        "baseUrl": "https://bedrock-runtime.$awsRegion.amazonaws.com",
+        "api": "bedrock-converse-stream",
+        "auth": "aws-sdk",
+        "models": [
+          {
+            "id": "global.anthropic.claude-opus-4-6-v1",
+            "name": "Claude Opus 4.6 (Bedrock)",
+            "reasoning": true,
+            "input": ["text", "image"],
+            "cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
+            "contextWindow": 200000,
+            "maxTokens": 8192
+          },
+          {
+            "id": "global.anthropic.claude-opus-4-5-20251001-v1:0",
+            "name": "Claude Opus 4.5 (Bedrock)",
+            "reasoning": true,
+            "input": ["text", "image"],
+            "cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
+            "contextWindow": 200000,
+            "maxTokens": 8192
+          },
+          {
+            "id": "global.anthropic.claude-sonnet-4-5-20250929-v1:0",
+            "name": "Claude Sonnet 4.5 (Bedrock)",
+            "reasoning": true,
+            "input": ["text", "image"],
+            "cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
+            "contextWindow": 200000,
+            "maxTokens": 8192
+          },
+          {
+            "id": "global.anthropic.claude-haiku-4-5-20251001-v1:0",
+            "name": "Claude Haiku 4.5 (Bedrock)",
+            "reasoning": false,
+            "input": ["text", "image"],
+            "cost": { "input": 0, "output": 0, "cacheRead": 0, "cacheWrite": 0 },
+            "contextWindow": 200000,
+            "maxTokens": 8192
+          }
+        ]
+      }
+    }
+  },
+  "agents": {
+    "defaults": {
+      "model": {
+        "primary": "amazon-bedrock/global.anthropic.claude-sonnet-4-5-20250929-v1:0"
+      }
+    }
+  }
+}
+"@
+
+Set-Content -Path $configFile -Value $configContent -Encoding UTF8
+Write-Ok "已配置 openclaw.json"
+
+# ─────────────────────────────────────────────
+# 步骤 5: 设置环境变量到当前会话
+# ─────────────────────────────────────────────
+Write-Info "正在设置环境变量..."
+
+# 设置为用户级环境变量（持久化）
+[Environment]::SetEnvironmentVariable("AWS_ACCESS_KEY_ID", $env:AWS_ACCESS_KEY_ID, "User")
+[Environment]::SetEnvironmentVariable("AWS_SECRET_ACCESS_KEY", $env:AWS_SECRET_ACCESS_KEY, "User")
+[Environment]::SetEnvironmentVariable("AWS_REGION", $env:AWS_REGION, "User")
+
+Write-Ok "已设置用户环境变量（新 PowerShell 窗口自动生效）"
+
+# ─────────────────────────────────────────────
+# 步骤 6: 完成
+# ─────────────────────────────────────────────
+Write-Host ""
+Write-Host "========================================" -ForegroundColor Green
+Write-Host "  配置完成！" -ForegroundColor Green
+Write-Host "========================================" -ForegroundColor Green
+Write-Host ""
+Write-Host "  配置摘要：" -ForegroundColor White
+Write-Host "    Provider: AWS Bedrock" -ForegroundColor Cyan
+Write-Host "    Region: $awsRegion" -ForegroundColor Cyan
+Write-Host "    默认模型: Claude Sonnet 4.5" -ForegroundColor Cyan
+Write-Host "    已配置模型:" -ForegroundColor White
+Write-Host "      * Claude Opus 4.6" -ForegroundColor Cyan
+Write-Host "      * Claude Opus 4.5" -ForegroundColor Cyan
+Write-Host "      * Claude Sonnet 4.5" -ForegroundColor Cyan
+Write-Host "      * Claude Haiku 4.5" -ForegroundColor Cyan
+Write-Host ""
+Write-Host "  使用方法：" -ForegroundColor White
+Write-Host "    cd 你的项目路径" -ForegroundColor Gray
+Write-Host "    openclaw" -ForegroundColor Cyan
+Write-Host ""
+Write-Host "  测试连接：" -ForegroundColor White
+Write-Host "    openclaw agent --session-id test --message `"Say OK`" --local" -ForegroundColor Cyan
+Write-Host ""
+Write-Host "  所需 IAM 权限：" -ForegroundColor White
+Write-Host "    * bedrock:InvokeModel" -ForegroundColor Yellow
+Write-Host "    * bedrock:InvokeModelWithResponseStream" -ForegroundColor Yellow
+Write-Host "    或使用托管策略：AmazonBedrockFullAccess" -ForegroundColor Yellow
+Write-Host ""

install-windows.ps1

@@ -1,6 +1,6 @@
 # ─────────────────────────────────────────────
 # OpenClaw 一键部署安装脚本 (Windows)
-# 安装 WSL2 + Ubuntu，然后在 WSL 中设置 OpenClaw
+# 安装 Node.js + OpenClaw，原生 Windows 运行
 # ─────────────────────────────────────────────
 
 $ErrorActionPreference = "Stop"
@@ -21,151 +21,111 @@ function Write-Header {
 Write-Header
 
 # ─────────────────────────────────────────────
-# 步骤 1: 检查 / 安装 WSL2
+# 步骤 1: 检查 / 安装 Node.js 22+
 # ─────────────────────────────────────────────
-Write-Info "正在检查 WSL2 安装..."
+Write-Info "正在检查 Node.js..."
 
-$wslInstalled = $false
-try {
-    $wslOutput = wsl --status 2>&1
-    if ($LASTEXITCODE -eq 0) {
-        $wslInstalled = $true
-    }
-} catch {
-    $wslInstalled = $false
-}
-
-# 检查 WSL 中是否有 Ubuntu
-$ubuntuAvailable = $false
-if ($wslInstalled) {
-    $distros = wsl --list --quiet 2>&1
-    if ($distros -match "Ubuntu") {
-        $ubuntuAvailable = $true
-    }
-}
-
-if (-not $wslInstalled -or -not $ubuntuAvailable) {
-    Write-Info "正在安装 WSL2 和 Ubuntu 24.04..."
-    Write-Warn "可能需要重启。重启后请再次运行此脚本。"
-
-    wsl --install -d Ubuntu-24.04
-    if ($LASTEXITCODE -ne 0) {
-        Write-Err "WSL2 安装失败。请手动安装：wsl --install -d Ubuntu-24.04"
-    }
-
-    Write-Ok "WSL2 + Ubuntu 24.04 安装完成。"
-    Write-Warn "如果提示重启，请重启计算机后再次运行此脚本。"
-
-    # 检查是否需要重启
-    $restartNeeded = $false
-    try {
-        wsl --status 2>&1 | Out-Null
-        if ($LASTEXITCODE -ne 0) { $restartNeeded = $true }
-    } catch {
-        $restartNeeded = $true
-    }
-
-    if ($restartNeeded) {
-        Write-Host ""
-        Write-Warn "需要重启才能完成 WSL2 安装。"
-        Write-Host "重启后，请再次运行此脚本。" -ForegroundColor Yellow
-        Write-Host ""
-        Read-Host "按 Enter 键退出"
-        exit 0
-    }
-} else {
-    Write-Ok "已找到 WSL2 和 Ubuntu。"
-}
-
-# ─────────────────────────────────────────────
-# 步骤 2: 在 WSL 中启用 systemd
-# ─────────────────────────────────────────────
-Write-Info "正在配置 WSL 中的 systemd..."
-
-$checkSystemd = wsl -d Ubuntu-24.04 -- bash -c "cat /etc/wsl.conf 2>/dev/null || echo ''"
-if ($checkSystemd -notmatch "systemd=true") {
-    wsl -d Ubuntu-24.04 -- bash -c "echo '[boot]' | sudo tee /etc/wsl.conf > /dev/null && echo 'systemd=true' | sudo tee -a /etc/wsl.conf > /dev/null"
-    Write-Ok "已在 /etc/wsl.conf 中启用 systemd"
-
-    # ─────────────────────────────────────────
-    # 步骤 3: 重启 WSL
-    # ─────────────────────────────────────────
-    Write-Info "正在重启 WSL 以应用 systemd..."
-    wsl --shutdown
-    Start-Sleep -Seconds 3
-    Write-Ok "WSL 已重启。"
-} else {
-    Write-Ok "systemd 已启用。"
-}
-
-# ─────────────────────────────────────────────
-# 步骤 4: 在 WSL 中安装 Node 22+
-# ─────────────────────────────────────────────
-Write-Info "正在检查 WSL 中的 Node.js..."
-
-$nodeCheck = wsl -d Ubuntu-24.04 -- bash -c "command -v node && node -v || echo 'NOT_FOUND'" 2>&1
 $needsNode = $true
 
-if ($nodeCheck -notmatch "NOT_FOUND" -and $nodeCheck -match "v(\d+)") {
+try {
-    $nodeVersion = [int]$Matches[1]
+    $nodeVersion = (node -v 2>$null)
-    if ($nodeVersion -ge 22) {
+    if ($nodeVersion -match "v(\d+)") {
-        Write-Ok "WSL 中已找到 Node.js v$nodeVersion (>= 22)。"
+        $major = [int]$Matches[1]
-        $needsNode = $false
+        if ($major -ge 22) {
-    } else {
+            Write-Ok "已找到 Node.js $nodeVersion"
-        Write-Warn "WSL 中已找到 Node.js v$nodeVersion，但需要 >= 22。正在升级..."
+            $needsNode = $false
+        } else {
+            Write-Warn "已找到 Node.js $nodeVersion，但需要 v22+，正在升级..."
+        }
     }
-} else {
+} catch {
-    Write-Warn "WSL 中未找到 Node.js。"
+    Write-Warn "未找到 Node.js。"
 }
 
 if ($needsNode) {
-    Write-Info "正在通过 NodeSource 在 WSL 中安装 Node.js 22..."
+    Write-Info "正在安装 Node.js 22..."
 
-    $installNodeScript = @'
+    $installed = $false
-set -e
-curl -fsSL https://deb.nodesource.com/setup_22.x | sudo -E bash -
-sudo apt-get install -y nodejs
-node -v
-'@
 
-    wsl -d Ubuntu-24.04 -- bash -c $installNodeScript
+    # 方式 1: winget（Windows 11 / Windows 10 自带）
-    if ($LASTEXITCODE -ne 0) {
+    if (-not $installed -and (Get-Command winget -ErrorAction SilentlyContinue)) {
-        Write-Err "WSL 中 Node.js 安装失败。"
+        Write-Info "使用 winget 安装..."
+        winget install OpenJS.NodeJS.LTS --accept-package-agreements --accept-source-agreements
+        if ($LASTEXITCODE -eq 0) {
+            $installed = $true
+            Write-Ok "Node.js 已通过 winget 安装"
+        }
     }
-    Write-Ok "WSL 中 Node.js 22 安装完成。"
-}
 
-# ─────────────────────────────────────────────
+    # 方式 2: Chocolatey
-# 步骤 5: 在 WSL 中安装 OpenClaw
+    if (-not $installed -and (Get-Command choco -ErrorAction SilentlyContinue)) {
-# ─────────────────────────────────────────────
+        Write-Info "使用 Chocolatey 安装..."
-Write-Info "正在在 WSL 中安装 OpenClaw..."
+        choco install nodejs-lts -y
-
+        if ($LASTEXITCODE -eq 0) {
-$openclawCheck = wsl -d Ubuntu-24.04 -- bash -c "command -v openclaw || echo 'NOT_FOUND'" 2>&1
+            $installed = $true
-
+            Write-Ok "Node.js 已通过 Chocolatey 安装"
-if ($openclawCheck -match "NOT_FOUND") {
+        }
-    wsl -d Ubuntu-24.04 -- bash -c "curl -fsSL https://openclaw.ai/install.sh | bash -s -- --no-onboard"
+    }
-    if ($LASTEXITCODE -ne 0) {
+
-        Write-Err "WSL 中 OpenClaw 安装失败。"
+    # 方式 3: 手动下载提示
+    if (-not $installed) {
+        Write-Host ""
+        Write-Err "无法自动安装 Node.js。请手动安装后重新运行此脚本：`n`n  下载地址：https://nodejs.cn/download/`n  或：https://nodejs.org/en/download/`n`n  安装完成后重新打开 PowerShell 运行此脚本。"
+    }
+
+    # 刷新 PATH
+    $env:Path = [System.Environment]::GetEnvironmentVariable("Path", "Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path", "User")
+
+    # 验证安装
+    try {
+        $nodeVersion = (node -v 2>$null)
+        Write-Ok "Node.js $nodeVersion 安装成功"
+    } catch {
+        Write-Err "Node.js 安装后验证失败。请关闭 PowerShell 重新打开后再试。"
     }
-    Write-Ok "WSL 中 OpenClaw 安装完成。"
-} else {
-    Write-Ok "WSL 中已安装 OpenClaw。"
 }
 
 # ─────────────────────────────────────────────
-# 步骤 6: 安装 OpenClaw 网关守护进程
+# 步骤 2: 安装 OpenClaw
 # ─────────────────────────────────────────────
-Write-Info "正在安装 OpenClaw 网关守护进程..."
+Write-Info "正在检查 OpenClaw..."
 
-wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && openclaw gateway install'
+$needsInstall = $true
-if ($LASTEXITCODE -ne 0) {
+
-    Write-Warn "网关守护进程安装遇到问题。您可以稍后使用以下命令安装：openclaw gateway install"
+try {
-} else {
+    $null = Get-Command openclaw -ErrorAction Stop
-    Write-Ok "网关守护进程安装完成。"
+    Write-Ok "已找到 OpenClaw。"
+    $needsInstall = $false
+} catch {
+    Write-Info "正在安装 OpenClaw..."
+}
+
+if ($needsInstall) {
+    npm install -g openclaw@latest
+    if ($LASTEXITCODE -ne 0) {
+        Write-Err "OpenClaw 安装失败。请手动运行：npm install -g openclaw@latest"
+    }
+
+    # 刷新 PATH
+    $env:Path = [System.Environment]::GetEnvironmentVariable("Path", "Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path", "User")
+
+    # 把 npm global bin 加到 PATH
+    try {
+        $npmPrefix = (npm config get prefix 2>$null).Trim()
+        if ($npmPrefix) {
+            $userPath = [Environment]::GetEnvironmentVariable("Path", "User")
+            if (-not ($userPath -split ";" | Where-Object { $_ -ieq $npmPrefix })) {
+                [Environment]::SetEnvironmentVariable("Path", "$userPath;$npmPrefix", "User")
+                $env:Path += ";$npmPrefix"
+            }
+        }
+    } catch {}
+
+    Write-Ok "OpenClaw 安装完成。"
 }
 
 # ─────────────────────────────────────────────
-# 步骤 7: 启动交互式配置
+# 步骤 3: 启动交互式配置
 # ─────────────────────────────────────────────
 Write-Host ""
 Write-Host "========================================" -ForegroundColor Green
@@ -177,7 +137,7 @@ Write-Host "  选择 MiniMax 可获得 7天免费试用 - 无需信用卡。" -F
 Write-Host "  注册地址：https://platform.minimax.io" -ForegroundColor Cyan
 Write-Host ""
 
-wsl -d Ubuntu-24.04 -- bash -c 'export PATH="$HOME/.openclaw/bin:$PATH" && openclaw onboard --accept-risk --flow quickstart --node-manager npm --skip-skills < /dev/tty'
+openclaw onboard --accept-risk --flow quickstart --node-manager npm --skip-skills
 
 Write-Host ""
 Write-Host "========================================" -ForegroundColor Green
@@ -185,7 +145,8 @@ Write-Host "  配置完成！" -ForegroundColor Green
 Write-Host "========================================" -ForegroundColor Green
 Write-Host ""
 Write-Host "  接下来：" -ForegroundColor White
-Write-Host "    1. 开始使用 OpenClaw：openclaw（在 WSL 中）" -ForegroundColor Gray
+Write-Host "    1. 进入项目目录：cd 你的项目路径" -ForegroundColor Gray
-Write-Host "    2. 添加技能（可选）：openclaw configure --section skills" -ForegroundColor Gray
+Write-Host "    2. 开始使用 OpenClaw：openclaw" -ForegroundColor Gray
-Write-Host "    3. 浏览可用技能：openclaw skills" -ForegroundColor Gray
+Write-Host "    3. 添加技能（可选）：openclaw configure --section skills" -ForegroundColor Gray
+Write-Host "    4. 浏览可用技能：openclaw skills" -ForegroundColor Gray
 Write-Host ""